Regviz

NXP Semiconductors /LPC43xx /SCT /OUTPUTDIRCTRL

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as OUTPUTDIRCTRL

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/NXP Semiconductors/LPC18xx/SCT/OUTPUTDIRCTRL#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (INDEPENDENT)SETCLR0 0 (INDEPENDENT)SETCLR1 0 (INDEPENDENT)SETCLR2 0 (INDEPENDENT)SETCLR3 0 (INDEPENDENT)SETCLR4 0 (INDEPENDENT)SETCLR5 0 (INDEPENDENT)SETCLR6 0 (INDEPENDENT)SETCLR7 0 (INDEPENDENT)SETCLR8 0 (INDEPENDENT)SETCLR9 0 (INDEPENDENT)SETCLR10 0 (INDEPENDENT)SETCLR11 0 (INDEPENDENT)SETCLR12 0 (INDEPENDENT)SETCLR13 0 (INDEPENDENT)SETCLR14 0 (INDEPENDENT)SETCLR15

SETCLR7=INDEPENDENT, SETCLR11=INDEPENDENT, SETCLR13=INDEPENDENT, SETCLR14=INDEPENDENT, SETCLR2=INDEPENDENT, SETCLR4=INDEPENDENT, SETCLR0=INDEPENDENT, SETCLR5=INDEPENDENT, SETCLR1=INDEPENDENT, SETCLR15=INDEPENDENT, SETCLR8=INDEPENDENT, SETCLR6=INDEPENDENT, SETCLR12=INDEPENDENT, SETCLR3=INDEPENDENT, SETCLR10=INDEPENDENT, SETCLR9=INDEPENDENT

Description

SCT output counter direction control register

Fields

SETCLR0

Set/clear operation on output 0. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR1

Set/clear operation on output 1. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR2

Set/clear operation on output 2. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR3

Set/clear operation on output 3. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR4

Set/clear operation on output 4. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR5

Set/clear operation on output 5. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR6

Set/clear operation on output 6. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR7

Set/clear operation on output 7. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR8

Set/clear operation on output 8. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR9

Set/clear operation on output 9. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR10

Set/clear operation on output 5. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR11

Set/clear operation on output 11. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR12

Set/clear operation on output 12. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR13

Set/clear operation on output 13. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR14

Set/clear operation on output 14. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.
SETCLR15

Set/clear operation on output 15. Value 0x3 is reserved. Do not program this value.

0 (INDEPENDENT): Independent. Set and clear do not depend on any counter.

1 (L_COUNTER): L counter. Set and clear are reversed when counter L or the unified counter is counting down.

2 (H_COUNTER): H counter. Set and clear are reversed when counter H is counting down. Do not use if UNIFY = 1.

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data